China Woodworking Machinery Equipment Manufacturers offer Woodworking machinery service, breakdowns, equipment and spare parts.
The material of the automatic edge banding machine itse […]
The material of the automatic edge banding machine itself is metal, and the object it operates is also metal. The working principle is to use frictional impact between metals to achieve the purpose of cleaning and optimization. Therefore, it is impossible to wear out during the edge banding machine. Avoidable and wear conditions can be more severe. Then the main point for the maintenance problem is the use of Runhua oil. The purpose of adding lubricant is to slow down the wear of the machine and lengthen its scrap time, but the lubricant cannot be used excessively and the effect of improving wear is not particularly obvious. So the key is for the maintenance of the edge banding machine accessories. The machine should be inspected regularly and the damaged components should be replaced in time. Especially the damaged steel balls should be replaced in time. Otherwise, the damaged steel balls will wear the castings.
Note for automatic edge banding machine maintenance: First, check regularly. Only when the problem is found before the problem has appeared, can the maintenance ensure that the edge banding machine can work normally. Furthermore, the replacement of the accessories of the edge banding machine. In order to ensure that the edge banding machine will not cause mechanical failure due to the accessories during the use, it is necessary to replace the relatively worn parts in a timely manner.