What are the specific requirements for using a fully automatic edge banding machine?

               
Update: 12-09-2019
               
Abst:

When using the automatic edge banding machine, be sure […]

When using the automatic edge banding machine, be sure to check the problem. The parts of the automatic edge banding machine should be tightly combined with the block. The tearing test should be done carefully, and the joints should be carefully checked for tightness. In the process of operation, scratches and severe wear should be avoided. To ensure the quality of the edge sealing, the pressure roller should be cleaned, and no traces are allowed on the objects after sealing. The thickness of the edge band is usually less than the thickness of the plate, and can not exceed 0.2 mm at most. The plate should be cleaned according to the category. For the high-gloss door, it can only be wiped with alcohol.

www.bettnmac.com

0
Contact Us